- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
- Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
- Refuse Body Truck/Roll-off Hoist Parts
- Lids
- Bottoms
-
Compactor Parts
Power UnitsElectrical PartsLimit/Safety/Photo/Press. SwitchesButtons/Switches/Keys/LegendsHydraulic PartsCylinders30 MMPanels And ControlsMotorsMotor Starters / Transformers / FusesAccessories Electrical30 MM Key Switch30 MM Selector Switch30 MM Push Only Switch30 MM Legends30 MM Contact Blocks30 MM Replacement Keys22.5 MMMarathon CylindersWQ-Galbreath CylindersPTR cylindersJV Cram-A-Lot CylindersOther MFG CylindersCylinder AccessoriesOther Compactor Parts
- Commercial Dumpster Parts
- Roll-Off Container Parts
-
Refuse Body Truck/Roll-off Hoist Parts
Heil Replacement PartsMcNeilus Replacement PartsTarp Systems & PartsRoll-Off Truck Hoist/Hook Hoist PartsRoll-off Truck / Hook Hoist PartsCarry Can Replacement PartsCables & StrapsRollers & AccessoriesSheave Pulleys & PinsHoist CylindersContainer Securement System & PartsOther Roll-off Truck / Hook Hoist PartsRoll Off Hydraulics,Filters,& PneumaticsRoll-Off ElectricalCarry Can Replacement CylindersCarry Can Body Replacement PartsCarry Can Grabber Beam PartsCarry Can Slide Assembly PartsCarry Can Hydraulics & PneumaticsCarry Can Hinge Replacement PartsOther Manufacturer Replacement Parts
Choose Your Bottom
Suggested Product Substitute
READY BOTTOM KIT FITS 7254 THROUGH 7272 - 2.5" X 3" - 6" RISERS
Part # : B.K.7254-72
Suggested Product Substitute
READY BOTTOM KIT FITS 7236 THROUGH 7254 - 2.5" X 3" - 6" RISERS
Part # : B.K.7236-54
72.5 X 54 BTM SLANT SLT RISER 17" EPA COMP NO HOLES
Suggested Product Substitute
READY BOTTOM KIT FITS 7236 THROUGH 7254 - 2.5" X 3" - 6" RISERS
Part # : B.K.7236-54
72.5 X 56 BTM SLANT EPA COMP NO HOLES
72.5 X 72 BTM EPA COMP NO HOLES
Part # : B.7272
72.5 X 80 BTM EPA COMP NO HOLES
Part # : B.7280
72.5 X 66 BTM EPA COMP NO HOLES
Part # : B.7266
72.5 X 54 BTM SLANT EPA COMP NO HOLES
Part # : B.7254.S
72.5 X 54 BTM EPA COMP NO HOLES
Part # : B.7254
72.5 X 57 BTM EPA COMP NO HOLES
Part # : B.7257
72.5 X 36 BTM EPA COMP NO HOLES
Part # : B.7236
Non-Standard Dumpster Bottoms — Built to Order
Non-standard and custom dumpster bottoms — fabricated to your container's exact dimensions. For legacy models, oversized containers, custom-fabricated bins, and specialty applications. Typical lead time is 2 weeks.
What this page covers
Not every container fits a standard catalog bottom. Older dumpsters (especially pre-2010), custom-fabricated bins built by regional fabricators, oversized commercial containers, and specialty applications all need bottoms made to spec.
PRT's fabrication shop builds non-standard bottoms in reasonable dimensions using the same heavy-gauge mild steel as our standard bottoms. We can add reinforcement, drain fittings, and any specialty features your container requires. Most orders ship in 2 weeks from the time we have final dimensions.
How to choose
Provide the container's exact outer dimensions (length, width), the configuration, and any special features (drain placement or capped rails). PRT customer service will quote based on those specs.
The easiest way to spec a non-standard bottom is to send PRT a photo of the existing bottom with a tape measure laid across it, plus the container's outer dimensions.
Common non-standard bottom applications
- Legacy containersPre-2010 models with non-current dimensions.
- Custom-fabricated commercial binsRegional fabricator builds with unique footprints.
- Oversized front-load containersAbove-8-yard or non-standard yard sizes.
Frequently asked questions
How long does it take to fabricate a custom dumpster bottom?
Typically 2 weeks from the time we have final dimensions.
How do I provide the dimensions for a custom bottom?
Send PRT the container's outer dimensions (length, width), and a photo of the existing bottom.
Are non-standard bottoms more expensive than standard?
Typically 25-50% more, depending on size and complexity. The premium is for the fabrication time, not the steel — material cost is similar.